Angled tubular cable lug, 45° Klauke
45°, tin-coated copper
CABLE LUG 25-M6 45DEG KLAUKE
KLAUKE
Art.-no.
WT5200163
EAN 6438548081689
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- Angled tubular cable lug for stranded conductors. For fine stranded conductors when used together with EKM 60 ID and EK 30ID.
- Flat contact surface with special angle pressing technology
Product information
Datasheets(X)
Wire cross section | 25 mm² |
Flange hole | M6 |
Wire diameter (d1) | 7 mm |
Diameter of hole (d2) | 6.4 mm |
Sleeve length (a) | 15 mm |
Width (b) | 14 mm |
Material | Copper |
Surface | Tin plated |
Brand | KLAUKE |
Last viewed
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Flush-mounted outlet diagonal IP21 Exxact
Cable tie anchor CTM-set, Hellermann PA, screw fastening, Black
Hexagon socket screw, cylinder head
Centre plate for D-sub 9 connector Exxact
EMC LOCKNUT MS PG EMC, brass nickel plated
Motor protection switch MPX3 32H
Through standoff WESO
Circuit breaker