Angled tubular cable lug, 45° Klauke
45°, tin-coated copper
CABLE LUG 35-M8 45º KLAUKE
KLAUKE
Art.-no.
WT5200137
EAN 6438190795552
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- Angled tubular cable lug for stranded conductors. For fine stranded conductors when used together with EKM 60 ID and EK 30ID.
- Flat contact surface with special angle pressing technology
Product information
Datasheets(X)
Wire cross section | 35 mm² |
Flange hole | M8 |
Wire diameter (d1) | 8.2 mm |
Diameter of hole (d2) | 8.5 mm |
Sleeve length (a) | 20 mm |
Width (b) | 17 mm |
Material | Copper |
Surface | Tin plated |
Last viewed
Call push-button RWC, flush Exxact
Motor protection switch MS132
Flush-mounted switch 10AX – 250V IP20 Valena Life
Spacer sleeve PA, black
Motion detector Basic Line Luxomat
Wing repair washer, large outer diameter
Plastofast, flat round pan head
3-phase conductor rail system MS
Circuit board support TRBHL
Flush-mounted switch 10AX – 250V IP20 Valena Life