Angled tubular cable lug, 90° BR with inspection hole Klauke
90°, tin-coated copper
CABLE LUG W.HOLE 70-M10 90° KLAUKE
KLAUKE
Art.-no.
4557070119
EAN 4012078498128
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- For stranded conductors. For fine stranded conductors when used together with EKM 60 ID and EK 30ID.
- Flat contact surface with special angle pressing technology.
- inspection hole
Product information
Datasheets(X)
Wire cross section | 70 mm² |
Flange hole | M10 |
Wire diameter (d1) | 12 mm |
Diameter of hole (d2) | 10.5 mm |
Sleeve length (a) | 21 mm |
Width (b) | 23 mm |
Material | Copper |
Surface | Tin plated |
Last viewed
Gel joint IP68 Reliseal
Press-in pin WETPS
LED lamp PARATHOM PRO AR111 LED 7
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Ground support Näpsä
Sealing ring AWS
Spacer peg SISI MSNI
Heavy-duty male connector hood, side entry with side locking
Hexagon socket screw, flat round head, flange
Metering panel basic 1T IP2XC Ensto