Change-over switch OT
CHANGE OVER SWITCH OT250E04CP ABB
ABB
With registration you can access the Würth Elektro online shop selection.
ABB Change-over switch. Reliable under all conditions.
Datasheets(X)
Version as main switch | Yes |
Version as maintenance-/service switch | Yes |
Version as safety switch | No |
Version as emergency stop installation | No |
Version as reversing switch | No |
Number of switches | 1 |
Max. rated operation voltage Ue AC | 1000 V |
Rated operating voltage | 1000-1000 V |
Rated permanent current at AC-23, 400 V | 250 A |
Rated permanent current at AC-21, 400 V | 250 A |
Rated short-time withstand current lcw | 8 kA |
Rated operation power at AC-23, 400 V | 140 kW |
Switching power at 400 V | 140 kW |
Number of poles | 4 |
Number of auxiliary contacts as normally closed contact | 0 |
Number of auxiliary contacts as normally open contact | 0 |
Number of auxiliary contacts as change-over contact | 0 |
Motor drive optional | No |
Motor drive integrated | No |
Voltage release optional | No |
Device construction | Built-in device plug-in technique |
Suitable for floor mounting | No |
Suitable for front mounting 4-hole | Yes |
Suitable for front mounting centre | No |
Suitable for distribution board installation | Yes |
Suitable for intermediate mounting | No |
Colour control element | Black |
Type of control element | Long turning handle |
Interlockable | Yes |
Degree of protection (IP), front side | IP20 |
Degree of protection (NEMA) | 1 |
E-number Finland | 3641528 |
Brand | ABB |