Chipboard screw
Zinc plated steel, full thread, low countersunk head, PZ drive
CHIPB. SCREW CS PZ 3X25
With registration you can access the Würth Elektro online shop selection.
A tight biting screw
Low countersunk head
- Suitable for use on wood and metal pieces
- Screws onto a metal piece without damaging the surface coating
Milling shank (size 5 x 70 mm)
- Reduces friction during screwdriving by 40%
- Less stress on power tools (longer service life)
Fine/low thread
- The fine thread of the small screws sticks better to the chipboard
- Low thread for faster screwing
Counter-threaded milling part of the shank
- Less force is needed when screwing due to less friction
- Reduces cracking
Needle-like, sharp tip
- Optimal contact without slipping
- The thread reaches right to the end of the tip
- Does not damage the surface
PZD drive
- The most popular drive on the market
- Good setting/centred
- Good fastening
- Better screwing accuracy
Not for outdoor use
Datasheets(X)
Nominal diameter | 3.0 mm |
Length | 25 mm |
Internal drive | Z1 |
Material | Steel |
Head type | Countersunk head |
Head diameter | 6.0 mm |
Drive type | Z |
Thread design | Full thread |
Product weight (per item) | 0.780 g |
Type description | 3,0X25 |
Last viewed
Contactor TeSys D
Mounting plate Cubo S
Power bus bar MPCB MPX3
Cable gland cable feed through, polyamide
Lighting rail middle connection unit CMCU3, Unipro
Power cable CU MCMK Prysmian
Cable gland Thorsman TET, PG
Blind rivet flange head open
High-bay luminaire IP65 High Bay Gen 3 DALI
Cable channel PVC, cut-off groove, Legrand