Chipboard screw
Zinc plated steel, full thread, low countersunk head, PZ drive
CHIPB. SCREW CS PZ 3x35
With registration you can access the Würth Elektro online shop selection.
A tight biting screw
Low countersunk head
- Suitable for use on wood and metal pieces
- Screws onto a metal piece without damaging the surface coating
Milling shank (size 5 x 70 mm)
- Reduces friction during screwdriving by 40%
- Less stress on power tools (longer service life)
Fine/low thread
- The fine thread of the small screws sticks better to the chipboard
- Low thread for faster screwing
Counter-threaded milling part of the shank
- Less force is needed when screwing due to less friction
- Reduces cracking
Needle-like, sharp tip
- Optimal contact without slipping
- The thread reaches right to the end of the tip
- Does not damage the surface
PZD drive
- The most popular drive on the market
- Good setting/centred
- Good fastening
- Better screwing accuracy
Not for outdoor use
Datasheets(X)
 | |
Nominal diameter | 3 mm |
Length | 35 mm |
Head type | Countersunk head |
Head diameter | 6 mm |
Internal drive | Z1 |
Thread type | Wood screw thread |
Thread design | Full thread |
Thread form | Single start thread |
Shape of tip | Pinpoint |
Angle of the tip | 34 Degree |
Material | Steel |
Surface | Zinc plated |
Product weight (per item) | 1 g |
Area of application | Fitting |
RoHS-compliant | Yes |
Last viewed
Key card switch centre plate Valena
Cable routing conduit FT 40 aluminium, Instal
Wing repair washer, fender washer, round hole, primarily for wood substrates
shunt release MPCB MPX3
Cable routing conduit aluminium, Instal
Floodlight Floodlight PFM, IP65
Universal terminal block OL Al/Cu 6-300mm²
C connector
PE bars with 16 mm2 and 6 mm2 pillar terminals KNA
Set screw, hex socket