Chipboard screw
Zinc plated steel, full thread, low countersunk head, PZ drive
CHIPB. SCREW CS PZ 4X12
With registration you can access the Würth Elektro online shop selection.
A tight biting screw
Low countersunk head
- Suitable for use on wood and metal pieces
- Screws onto a metal piece without damaging the surface coating
Milling shank (size 5 x 70 mm)
- Reduces friction during screwdriving by 40%
- Less stress on power tools (longer service life)
Fine/low thread
- The fine thread of the small screws sticks better to the chipboard
- Low thread for faster screwing
Counter-threaded milling part of the shank
- Less force is needed when screwing due to less friction
- Reduces cracking
Needle-like, sharp tip
- Optimal contact without slipping
- The thread reaches right to the end of the tip
- Does not damage the surface
PZD drive
- The most popular drive on the market
- Good setting/centred
- Good fastening
- Better screwing accuracy
Not for outdoor use
Datasheets(X)
 | |
Nominal diameter | 4 mm |
Length | 12 mm |
Head type | Countersunk head |
Head diameter | 8 mm |
Internal drive | Z2 |
Thread type | Wood screw thread |
Thread design | Full thread |
Thread form | Single start thread |
Shape of tip | Pinpoint |
Angle of the tip | 34 Degree |
Material | Steel |
Surface | Zinc plated |
Product weight (per item) | 0.850 g |
Area of application | Fitting |
RoHS-compliant | Yes |
Last viewed
Spacer sleeve AL
Coupling sleeve Aluminium pipe coupler
Flush-mounted outlet with cover plate IP21 Exxact
Conduit bend JMKL HF 90 degrees
Lighting rail MEK 70 painted, Meka
Power source Transformer, Wago
Motor protection switch MS132
Lighting rail T33, Unipro
Sound-proofing component Instal
Push button releasable Osmoz