Chipboard screw
Zinc plated steel, full thread, low countersunk head, PZ drive
CHIPB. SCREW CS PZ 4x30
With registration you can access the Würth Elektro online shop selection.
A tight biting screw
Low countersunk head
- Suitable for use on wood and metal pieces
- Screws onto a metal piece without damaging the surface coating
Milling shank (size 5 x 70 mm)
- Reduces friction during screwdriving by 40%
- Less stress on power tools (longer service life)
Fine/low thread
- The fine thread of the small screws sticks better to the chipboard
- Low thread for faster screwing
Counter-threaded milling part of the shank
- Less force is needed when screwing due to less friction
- Reduces cracking
Needle-like, sharp tip
- Optimal contact without slipping
- The thread reaches right to the end of the tip
- Does not damage the surface
PZD drive
- The most popular drive on the market
- Good setting/centred
- Good fastening
- Better screwing accuracy
Not for outdoor use
Datasheets(X)
| 3259584.jpg"/> | |
Nominal diameter | 4.0 mm |
Length | 30 mm |
Material | Steel |
Head type | Countersunk head |
Head diameter | 8.0 mm |
Thread design | Full thread |
Product weight (per item) | 1.620 g |
Type description | 4,0X30 |
Last viewed
Elbox fitting female insulated PA
Hexagon socket screw, flat round head, flange
Heavy-duty female connector hood, side entry with side locking
Heat shrink hose TF21
Circuit breaker
Slotted screw countersunk head DIN 965
CONDUCTOR TAG STRIP 1.5–2.5 MM2
Tapping screw countersunk head DIN 7982-C
Signal cable FLEX-OZ
Installation conductor H05V2-K MKJ 90