Chipboard screw
Zinc plated steel, full thread, low countersunk head, PZ drive
CHIPB. SCREW CS PZ 4x35
With registration you can access the Würth Elektro online shop selection.
A tight biting screw
Low countersunk head
- Suitable for use on wood and metal pieces
- Screws onto a metal piece without damaging the surface coating
Milling shank (size 5 x 70 mm)
- Reduces friction during screwdriving by 40%
- Less stress on power tools (longer service life)
Fine/low thread
- The fine thread of the small screws sticks better to the chipboard
- Low thread for faster screwing
Counter-threaded milling part of the shank
- Less force is needed when screwing due to less friction
- Reduces cracking
Needle-like, sharp tip
- Optimal contact without slipping
- The thread reaches right to the end of the tip
- Does not damage the surface
PZD drive
- The most popular drive on the market
- Good setting/centred
- Good fastening
- Better screwing accuracy
Not for outdoor use
Datasheets(X)
Nominal diameter | 4.0 mm |
Length | 35 mm |
Internal drive | Z2 |
Material | Steel |
Head type | Countersunk head |
Head diameter | 8.0 mm |
Drive type | Z |
Thread design | Full thread |
Product weight (per item) | 1.870 g |
Type description | 4,0X35 |
Last viewed
LED strip 12V IP20 Prime Strip Color
Roofing screw, drill tip
Corner component Instal
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Alarm contactor with short-circuit alarm MS
Floor heater cable Cable Kit 200
Through standoff WESO
Coupling sleeve straight OBO
Valena Life with Netatmo awake/sleep switch
End component P Instal