Miniature circuit breaker MCN 6kA Hager
CIRCUIT BREAKER 1-POLE C 1X13A MCN113E
UTU
With registration you can access the Würth Elektro online shop selection.
The circuit breaker is equipped with a delayed thermal release for overload protection and an electromagnetic release for short-circuit protection. Can be equipped with auxiliary modules that can be retrofitted. The device is equipped with a marker label and it can be replaced from the rail by releasing the DIN rail bracket to the extreme position.
Datasheets(X)
Built-in depth | 70 mm |
Release characteristic | C |
Number of poles (total) | 1 |
Number of protected poles | 1 |
Rated current | 13 A |
Rated voltage | 400 V |
Rated insulation voltage Ui | 500 V |
Rated impulse withstand voltage Uimp | 4 kV |
Rated short-circuit breaking capacity Icn according to EN 60898 at 230 V | 6 kA |
Voltage type | AC |
Rated short-circuit breaking capacity Icn according to EN 60898 at 400 V | 6 kA |
Frequency | 50-60 Hz |
Current limiting class | 3 |
Flush-mounted installation | Yes |
Concurrently switching neutral conductor | No |
Over voltage category | 3 |
Pollution degree | 2 |
Additional equipment possible | Yes |
Width in number of modular spacings | 1 |
Degree of protection (IP) | IP2X |
Ambient temperature during operating | -25-70 °C |
Connectable conductor cross section multi-wired | 1-25 mm² |
Connectable conductor cross section solid-core | 1-35 mm² |
Explosion-proof | No |
E-number Finland | 3246513 |
Brand | UTU |
Last viewed
Motion sensor Valena
Hexagon socket screw, flat round head, flange
Cable clamp CCA zinc plated, Meka
Heavy-duty female connector with spring connectors
Universal bracket PYK50 pole and additional support Pajap, UTU
Lighting rail adapter A100, Unipro
Mirror defogger 50W Ebeco Clear Mirror
Spacer screw SIUL ZN
Fender washer, wing repair washer
Flush-mounted switch 10AX – 250V IP20 Valena Life