Miniature circuit breaker MCN 6kA Hager
CIRCUIT BREAKER 1-POLE C 1X1A MCN101
UTU
With registration you can access the Würth Elektro online shop selection.
The circuit breaker is equipped with a delayed thermal release for overload protection and an electromagnetic release for short-circuit protection. Can be equipped with auxiliary modules that can be retrofitted. The device is equipped with a marker label and it can be replaced from the rail by releasing the DIN rail bracket to the extreme position.
Datasheets(X)
Built-in depth | 70 mm |
Release characteristic | C |
Number of poles (total) | 1 |
Number of protected poles | 1 |
Rated current | 1 A |
Rated voltage | 400 V |
Rated insulation voltage Ui | 500 V |
Rated impulse withstand voltage Uimp | 4 kV |
Rated short-circuit breaking capacity Icn according to EN 60898 at 230 V | 6 kA |
Voltage type | AC |
Rated short-circuit breaking capacity Icn according to EN 60898 at 400 V | 6 kA |
Rated short-circuit breaking capacity Icu according to IEC 60947-2 at 230 V | 10 kA |
Frequency | 50-60 Hz |
Current limiting class | 3 |
Flush-mounted installation | Yes |
Concurrently switching neutral conductor | No |
Over voltage category | 3 |
Pollution degree | 2 |
Additional equipment possible | Yes |
Width in number of modular spacings | 1 |
Degree of protection (IP) | IP20 |
Ambient temperature during operating | -25-70 °C |
Connectable conductor cross section multi-wired | 1-25 mm² |
Connectable conductor cross section solid-core | 1-35 mm² |
Explosion-proof | No |
E-number Finland | 3246501 |
Brand | UTU |