Miniature circuit breaker MCS 6kA Hager
CIRCUIT BREAKER 1-POLE JL C 1X16A MCS116
UTU
With registration you can access the Würth Elektro online shop selection.
1-pole circuit breaker with Quick Connect spring connectors, according to DIN EN 60898-1; EN 60898-1:2003; EN 60898-1, pr A1:2003, spring connection on the output side up to 16A rated current and on the supply side up to 63A on the busbar. Contact protection according to IP2x DIN VDE 0106 part 100, with VDE marking. The circuit breaker is equipped with a delayed trip against overload and an electromagnetic trip for short-circuit protection. The device has a marking label for group marking.
Datasheets(X)
Built-in depth | 70 mm |
Release characteristic | C |
Number of poles (total) | 1 |
Number of protected poles | 1 |
Rated current | 16 A |
Rated voltage | 400 V |
Rated insulation voltage Ui | 500 V |
Rated impulse withstand voltage Uimp | 4 kV |
Rated short-circuit breaking capacity Icn according to EN 60898 at 230 V | 6 kA |
Voltage type | AC |
Rated short-circuit breaking capacity Icn according to EN 60898 at 400 V | 6 kA |
Rated short-circuit breaking capacity Icu according to IEC 60947-2 at 230 V | 6 kA |
Frequency | 50-60 Hz |
Current limiting class | 3 |
Flush-mounted installation | Yes |
Concurrently switching neutral conductor | No |
Over voltage category | 3 |
Pollution degree | 2 |
Additional equipment possible | Yes |
Width in number of modular spacings | 1 |
Degree of protection (IP) | IP20 |
Ambient temperature during operating | -25-70 °C |
Connectable conductor cross section multi-wired | 1-25 mm² |
Connectable conductor cross section solid-core | 1-35 mm² |
Explosion-proof | No |
Last viewed
3-phase supply terminal MS
Floor plate PPU zinc plated, Meka
Flush-mounted switch IP21 Exxact
Hexagon socket screw, flat round head
Reducer, plastic metric/metric
Auxiliary contactor TeSys
Circuit breaker Acti 9 iC60N
Lever with lamp symbol Exxact
Cable tie with stand natural TRSHK-M
Hexagon socket screw, cylinder head