Line protection switch Acti 9 IC60H
CIRCUIT BREAKER 2-POL. C 25A
SCHNEIDER ELECTRIC
With registration you can access the Würth Elektro online shop selection.
Acti9 line protection switches
Line protection switches for demanding conditions and versatile use!
Properties:
- Breaking capacity 6–100 kA
- Nominal tripping current 0.5–63 A
- Number of poles: 1, 2, 3 or 4
- B, C, D, K and Z tripping curves
- Separate apertures for busbar and conductor
- Visual indication of point status
Datasheets(X)
Built-in depth | 78.5 mm |
Release characteristic | C |
Number of poles (total) | 2 |
Number of protected poles | 2 |
Rated current | 25 A |
Rated voltage | 400 V |
Rated insulation voltage Ui | 500 V |
Rated impulse withstand voltage Uimp | 6 kV |
Rated short-circuit breaking capacity Icn according to EN 60898 at 230 V | 10 kA |
Voltage type | AC/DC |
Rated short-circuit breaking capacity Icn according to EN 60898 at 400 V | 10 kA |
Rated short-circuit breaking capacity Icu according to IEC 60947-2 at 230 V | 30 kA |
Rated short-circuit breaking capacity Icu according to IEC 60947-2 at 400 V | 15 kA |
Frequency | 50-60 Hz |
Current limiting class | 3 |
Concurrently switching neutral conductor | No |
Over voltage category | 4 |
Pollution degree | 3 |
Additional equipment possible | Yes |
Width in number of modular spacings | 2 |
Degree of protection (IP) | IP20 |
Ambient temperature during operating | 35-70 °C |
Connectable conductor cross section multi-wired | 1-16 mm² |
Connectable conductor cross section solid-core | 1-25 mm² |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!