Miniature circuit breaker MCN 6kA Hager
CIRCUIT BREAKER 3-POLE C 3X63A MCN363E
UTU
With registration you can access the Würth Elektro online shop selection.
The circuit breaker is equipped with a delayed thermal release for overload protection and an electromagnetic release for short-circuit protection. Can be equipped with auxiliary modules that can be retrofitted. The device is equipped with a marker label and it can be replaced from the rail by releasing the DIN rail bracket to the extreme position.
Datasheets(X)
Built-in depth | 70 mm |
Release characteristic | C |
Number of poles (total) | 3 |
Number of protected poles | 3 |
Rated current | 63 A |
Rated voltage | 400 V |
Rated insulation voltage Ui | 500 V |
Rated impulse withstand voltage Uimp | 4 kV |
Rated short-circuit breaking capacity Icn according to EN 60898 at 230 V | 6 kA |
Voltage type | AC |
Rated short-circuit breaking capacity Icn according to EN 60898 at 400 V | 6 kA |
Frequency | 50-60 Hz |
Current limiting class | 3 |
Flush-mounted installation | Yes |
Concurrently switching neutral conductor | No |
Over voltage category | 3 |
Pollution degree | 2 |
Additional equipment possible | Yes |
Width in number of modular spacings | 3 |
Degree of protection (IP) | IP2X |
Ambient temperature during operating | -25-70 °C |
Connectable conductor cross section multi-wired | 1-25 mm² |
Connectable conductor cross section solid-core | 1-35 mm² |
Explosion-proof | No |
E-number Finland | 3246763 |
Brand | UTU |
Last viewed
Installation conductor H07V2-K MKEM 90
Circuit breaker Acti 9 iC60N
Flange bolt, hexagon head, lock toothing
G-Tubular glass fuse, slow (T) 6.3X32mm
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Terminal block 2002 series 3-conductor TOPJOB® S
Circuit board support TRDLCBST
Selector switch head XB5 Harmony ZB5AD2
Circuit breaker
Tubular cable lug Elpress