Modular contactor Acti 9
CONTACTOR 25A 230VAC A9C20731
SCHNEIDER ELECTRIC
With registration you can access the Würth Elektro online shop selection.
- DIN rail mountable contactor Acti 9 iCT
- For electric circuit monitoring in all commercial, industrial, and residential buildings
- Single or three-phase load monitoring up to 100 A.
- Interface between control and power circuits in lighting, heating, baffles, furnaces, irrigation systems, ventilation engines and heat pump engines, etc.
Datasheets(X)
Rated operating voltage | 250-250 V |
Rated operation current | 25 A |
Utility category | 7 |
Rated excitation voltage | 230-240 V |
Voltage type (operating voltage) | AC |
Voltage type (excitation voltage) | AC |
Number of contacts as normally open contact | 1 |
Number of contacts as normally closed contact | 0 |
Max. incandescent lamp load | 2850 W |
Max. load fluorescent lamp | 1200 VA |
Max. load fluorescent lamp (Duo circuit) | 2400 VA |
Max. load fluorescent lamp (parallel compensated) | 1200 VA |
Slider for hand switch | No |
Built-in depth | 43.5 mm |
Additional equipment possible | Yes |
Degree of protection (IP) | IP20 |
E-number Finland | 3781521 |
Brand | SCHNEIDER ELECTRIC |
Last viewed
Series marking Power Cage Clamp
Stop plug with O ring Metal, nickel plated
Lock washer, type B
Through sleeve AJI
Serrated lock washer/disk, externally serrated, type A
ENLARGER MS PG/PG Brass nickel plated
LED strip 24V IP66 LS V
Flange bolt, hexagon head, lock toothing
Gel joint IP68 Reliseal
Cylindrical pin, unhardened