Modular contactor Acti 9
CONTACTOR iCT 3S 25A 230VAC
SCHNEIDER ELECTRIC
With registration you can access the Würth Elektro online shop selection.
- DIN rail mountable contactor Acti 9 iCT
- For electric circuit monitoring in all commercial, industrial, and residential buildings
- Single or three-phase load monitoring up to 100 A.
- Interface between control and power circuits in lighting, heating, baffles, furnaces, irrigation systems, ventilation engines and heat pump engines, etc.
Datasheets(X)
Rated operating voltage | 400-400 V |
Rated operation current | 25 A |
Rated excitation voltage | 220-240 V |
Voltage type (operating voltage) | AC |
Voltage type (excitation voltage) | AC |
Number of contacts as normally open contact | 3 |
Max. incandescent lamp load | 5700 W |
Max. load fluorescent lamp | 2400 VA |
Max. load fluorescent lamp (Duo circuit) | 4800 VA |
Max. load fluorescent lamp (parallel compensated) | 2400 VA |
Slider for hand switch | No |
Width in number of modular spacings | 2 |
Built-in depth | 43.5 mm |
Additional equipment possible | Yes |
With day/night function | No |
Hum-free | No |
Degree of protection (IP) | IP20 |
E-number Finland | 3781524 |
Brand | SCHNEIDER ELECTRIC |
Last viewed
LED strip 24V IP67 LEDStrip Midlum
Signal cable LIYY
Cover plate 85 mm Exxact-Artic
Drill tip screw, cylinder head, AW drive pias®
End component P Instal
G-Tubular glass fuse, fast (F) 5X20 mm
Hexagon screw, full thread
Hexagon screw, full thread
Hexagon screw, full thread
Rail mounting support Ensto