Modular contactor Acti 9
CONTACTOR iCT 4S 40A 230VAC
SCHNEIDER ELECTRIC
With registration you can access the Würth Elektro online shop selection.
- DIN rail mountable contactor Acti 9 iCT
- For electric circuit monitoring in all commercial, industrial, and residential buildings
- Single or three-phase load monitoring up to 100 A.
- Interface between control and power circuits in lighting, heating, baffles, furnaces, irrigation systems, ventilation engines and heat pump engines, etc.
Datasheets(X)
Rated operating voltage | 400-400 V |
Rated operation current | 40 A |
Utility category | 7 |
Rated excitation voltage | 220-240 V |
Voltage type (operating voltage) | AC |
Voltage type (excitation voltage) | AC |
Number of contacts as normally open contact | 4 |
Number of contacts as normally closed contact | 0 |
Max. incandescent lamp load | 15750 W |
Max. load fluorescent lamp | 7200 VA |
Max. load fluorescent lamp (Duo circuit) | 11400 VA |
Max. load fluorescent lamp (parallel compensated) | 7200 VA |
Slider for hand switch | No |
Built-in depth | 43.5 mm |
Additional equipment possible | Yes |
Degree of protection (IP) | IP20 |
E-number Finland | 3781544 |
Brand | SCHNEIDER ELECTRIC |
Last viewed
Office luminaire Linear IndiviLED Direct/Indirect
Miniature circuit breaker MCN 6kA Hager
Slotted screw Pan head ISO 14583
Slotted screw Pan head ISO 14583
Cable tie adhesive surface natural TRMWSEB
Wall bracket VK2 hot dip galvanised, Meka
Serrated lock washer/disk, externally serrated, type A
Hexagon screw, full thread
Surface-mounted junction box AP10 IP65, plastic
Serrated lock washer/disk, externally serrated, type A