Charging station control unit - EVlink LMS
CONTROL UNIT EVLINK-LMS 100 STATE DYNA.
SCHNEIDER ELECTRIC
With registration you can access the Würth Elektro online shop selection.
EVlink LMS can be used to connect EVlink charging devices to local control. Locally, LMS can be used to distribute the available power between installed EVlink electric car charging points. With EVlink LMS, a fixed maximum value can be defined for charging devices, according to which LMS dynamically distributes energy below this fixed value between chargers based on energy demand and defined system settings. With LMS’s dynamic mode of operation and separate metering, the load of charging devices can be controlled in real time according to the rest of the property’s consumption. The LMS can also be used to manage the access rights of charging devices and to produce reports on the energy consumption.
Datasheets(X)
Loading current | 2.5 A |
Nominal voltage | 24 V |
Energy consumption | 16 W |
Emergency release at power failure | No |
Max. number of addressable charging points | 200 |
With communication interface | Yes |
Width | 157 mm |
Height | 150 mm |
Depth | 46 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
