Welcome to Würth Elektro For trade customers only
TST  TAPPER SEALING TECHNOLOGY

Cable entry flange FL21 insert D-A-F

DESIGN-A-FLANGE 68X68 9X7-14MM
TST TAPPER SEALING TECHNOLOGY

Art.-no. 596765408
EAN 7394270151887

-
Cable entry flange FL21 insert D-A-F

Art.-no. 596765408

-
Quantity
PU
x 1

Show availability at another Center
Exclusively for trade customers

With registration you can access the Würth Elektro online shop selection.

Design-A-Flange


Design your own sealing plate solution.



Design-A-Flange is a completely new cable entry flange concept,


which cannot be compared to other products on the market.


Design-A-Flange allows various different options of usage, as the entry of the flange can be


changed as needed with replaceable inserts.



It is no longer necessary to use different-sized cable entry flanges with pre-placed lead-throughs,


but you can decide yourself what size lead-throughs should be and how many of them you want, as well as


whether there is also a need for strain relief.


You just choose the inserts that meet your needs and you have a ready-made cable entry flange for your desired application.



With Design-A-Flange, you can use


standardized solutions or design your own.


The size, number and placement of the through holes


can be defined as desired.


You can choose a flange model that covers


today’s requirements, or a solution that can also


cover future requirements.


Changing the cable entry is easy; you just change


the inserts of the flange to suit the new requirements.



The Design-A-Flange gives many possibilities


for the use of different gaskets thanks to the


interchangeable inserts. If the waterproof and


dustproof membranes are not enough, you can either


cut the membrane off, or choose the insert “knockout”


and install KLIKSEAL, or some other type


of cable gland.


This also provides strain relief for the cable.



Design-A-Flange allows you to decide how to arrange the inserts, the size of the holes


and where you want them on the flange.


After this, it is easy to choose a seal that is stylish and easy to install.


You can design 120 unique variations of the Design-A-Flange and its inserts.



The Design-A-Flange cable entry flange concept is IP65 rated with or without cables.


For the first time, a flange that gives a high IP rating and at the same time


a lot of options.



All internal parts of Design-A-Flange are equipped with push-out membranes. No tools are needed to install


the cables. The cables are simply pressed through the membrane on the flange and the installation is complete.


A round hole is always obtained in the penetration, so IP65 installation is guaranteed.



Material fiberglass-reinforced polypropylene and TPE, Halogen-free.

Product information

Würth Elektronik Oy Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Width

68 mm

Brand

TST TAPPER SEALING TECHNOLOGY

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Elektronik Oy Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information