Light throttle flush mounted, Jussi
DIMMER 2112UJ-214-510
ABB
With registration you can access the Würth Elektro online shop selection.
For adjusting analogue fluorescent tube semiconductor ballasts (IEC 929). Up to four ballasts can be connected directly to one light throttle. Use an external relay or contactor for bigger loads.
Datasheets(X)
Assembly arrangement | Basic element with full cover plate |
Method of operation | Turn/push button |
Type of load | Other |
Substation input | No |
Light value memory | No |
Applicable with button | No |
Applicable with movement sensor | No |
Applicable with presence indicator | No |
Applicable with time switch/timer | No |
Applicable with transmission button | No |
Applicable with infrared button | No |
Type of fastening | Mounting with claw and screw |
Material | Plastic |
Material quality | Thermoplastic |
Halogen free | Yes |
Surface protection | Untreated |
Surface finishing | Matt |
Colour | White |
RAL-number (similar) | 9010 |
Suitable for degree of protection (IP) | IP20 |
Nominal voltage | 230-230 V |
Frequency | 50-60 Hz |
Last viewed
Connector component for DLP-S cable channel
Rocker with LED indicator and clock symbol Valena
Power source Transformer, Wago
Circuit breaker
Flange bolt, hexagon head, lock toothing
Wall brackets met S3D
Cable routing conduit aluminium, Instal
Motor protection switch MPX3 32H
Neutral bar N and PE bars with 16 mm2 pillar terminals, Ensto
Contactor AF96