Retaining ring
DIN 471, spring steel, phosphated and oiled
DIN 471 12x1 PLAIN
Art.-no.
043812
EAN 6416562112541
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- Safely restricts range of movement, and also the spinning motion of machine parts in shafts and boreholes ‒ in pre-defined dimensions.
- Large squeezing, pulling and striking forces are transmitted without any twisting.
- Large axial forces are transmitted from a machine part to a groove in the walling.
- The retaining rings can also be used at high speeds.
- The rings can be removed quickly and easily with one’s own pliers.
Product information
Datasheets(X)
 | |
Suitable for shafts | 12 mm |
Suitable for groove diameter | 11.5 mm |
Internal diameter (d) | 11 mm |
Eye width (a) | 3.3 mm |
Width (b) | 1.8 mm |
Thickness (s) | 1 mm |
Material | Spring steel |
Surface | Plain |
Design | Standard design |
Form | A |
DIN | 471 |
Last viewed
Chipboard screw
contact housing for limit switches OsiSense
Terminal block 280 series, WAGO
Tapping screw raised countersunk head DIN 7983-C
Flush-mounted switch IP21 Exxact
Surface-mounted box 25mm Renova
Surface-mounted box 22mm Renova
Central feed unit Canalis KNA
Safety label 793 series, WMB, WAGO
LED lamp VINTAGE 1906 LED NON-DIM