Retaining ring
DIN 471, spring steel, phosphated and oiled
DIN 471 14x1 PLAIN
Art.-no.
043814
EAN 6416562112565
-
Show availability at another Center
In order to check the stock in a Würth Elektronik Oy branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user?\r\nPlease go to the WürthElektroShop registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- Safely restricts range of movement, and also the spinning motion of machine parts in shafts and boreholes ‒ in pre-defined dimensions.
- Large squeezing, pulling and striking forces are transmitted without any twisting.
- Large axial forces are transmitted from a machine part to a groove in the walling.
- The retaining rings can also be used at high speeds.
- The rings can be removed quickly and easily with one’s own pliers.
Product information
Datasheets(X)
 | |
Suitable for shafts | 14 mm |
Suitable for groove diameter | 13.4 mm |
Internal diameter (d) | 12.9 mm |
Eye width (a) | 3.5 mm |
Width (b) | 2.1 mm |
Thickness (s) | 1 mm |
Material | Spring steel |
Surface | Plain |
Design | Standard design |
Form | A |
DIN | 471 |
Last viewed
Lighting rail T34F, Unipro
Hexagon socket screw, flat cylinder head
Working current tripping device MS
Flange bolt, hexagon head, lock toothing
Terminal block 280 series, WAGO
Floodlight Floodlight PFM, IP65
Vehicle protecting tube POLYFLEX PA6 HB
Flexible wiring duct round, HelaDuct Flex
Taptite DIN 7500-C, cylinder head, PZ, thread-rolling screw