Retaining ring
DIN 471, spring steel, phosphated and oiled
DIN 471 30x1,5 PLAIN
Art.-no.
043830
EAN 6416562737997
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- Safely restricts range of movement, and also the spinning motion of machine parts in shafts and boreholes ‒ in pre-defined dimensions.
- Large squeezing, pulling and striking forces are transmitted without any twisting.
- Large axial forces are transmitted from a machine part to a groove in the walling.
- The retaining rings can also be used at high speeds.
- The rings can be removed quickly and easily with one’s own pliers.
Product information
Datasheets(X)
 | |
Suitable for shafts | 30 mm |
Suitable for groove diameter | 28.6 mm |
Internal diameter (d) | 27.9 mm |
Eye width (a) | 5 mm |
Width (b) | 3.5 mm |
Thickness (s) | 1.5 mm |
Material | Spring steel |
Surface | Plain |
Design | Standard design |
Form | A |
DIN | 471 |
Last viewed
Installation cable MMJ
Washer, flat, for hexagon screws and nuts
Cable tie TWIST LOCK natural TRTL
Conduit bend JMKL HF 90 degrees, sleeve on the short end
Installation conductor H05V2-K MKJ 90
Installation conductor H05V2-K MKJ 90
Circuit breaker
Slotted cable trunking with cut-off groove HF Transcab Legrand
Motor protection switch MS116
Cable tie natural colour HellermannTyton