Retaining ring
DIN 471, spring steel, phosphated and oiled
DIN 471 42x1,75 PLAIN
Art.-no.
043842
EAN 6416562112886
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- Safely restricts range of movement, and also the spinning motion of machine parts in shafts and boreholes ‒ in pre-defined dimensions.
- Large squeezing, pulling and striking forces are transmitted without any twisting.
- Large axial forces are transmitted from a machine part to a groove in the walling.
- The retaining rings can also be used at high speeds.
- The rings can be removed quickly and easily with one’s own pliers.
Product information
Datasheets(X)
 | |
Suitable for shafts | 42 mm |
Suitable for groove diameter | 39.5 mm |
Internal diameter (d) | 38.5 mm |
Eye width (a) | 6.5 mm |
Width (b) | 4.5 mm |
Thickness (s) | 1.75 mm |
Material | Spring steel |
Surface | Plain |
Design | Standard design |
Form | A |
DIN | 471 |
Last viewed
Cover plate 90 mm Axcent
Cable tie with stand natural TRSHK-M
Circuit board support TRTCBS
Cable trunking, screw mounting Ultra Exxact
Hexagon socket screw, cylinder head
Wire shelf WMT Acid-resisting steel, Meka
Floodlight Floodlight PFM, IP65
Energy meter
Surface-mounted RCD outlet IP21 Impressivo
Downlight IP65 Ledinaire All-in CCT DIM