Retaining ring
DIN 471 50x2 PLAIN
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
DIN 471, spring steel, phosphated and oiled
- Safely restricts range of movement, and also the spinning motion of machine parts in shafts and boreholes ‒ in pre-defined dimensions.
- Large squeezing, pulling and striking forces are transmitted without any twisting.
- Large axial forces are transmitted from a machine part to a groove in the walling.
- The retaining rings can also be used at high speeds.
- The rings can be removed quickly and easily with one’s own pliers.
Product information
Datasheets(X)
 | |
Suitable for shafts | 50 mm |
Suitable for groove diameter | 47 mm |
Internal diameter (d) | 45.8 mm |
Eye width (a) | 6.9 mm |
Width (b) | 5.1 mm |
Thickness (s) | 2 mm |
Material | Spring steel |
Surface | Plain |
Design | Standard design |
Form | A |
DIN | 471 |
