Flange bolt, hexagon head, lock toothing
W-0274, steel 8.8, zinc plated, blue passivated (A2K)
DIN 6921 ZINC PLATED M8X12 + serration
With registration you can access the Würth Elektro online shop selection.
- The locking teeth push into the material of the component that is being screwed and stop it from opening (no unlocking torque in the unscrewing direction)
- The material that is being screwed must demonstrate a significantly lower hardness in comparison to the screw (surface hardness of the screw: min. 250 HV)
- Particularly suited for short clamping lengths
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M8 |
Length (l) | 12 mm |
Head diameter (d) | 17.9 mm |
Head height (k) | 8.1 mm |
Standards | WN 274 |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated |
Locking device operating principle | Serration |
Locking function | Locking against self-loosening by mechanical interlocking |
Head type | Hexagon head with flange |
Drive type | Outer hexagon |
External drive (s) | WS13 |
Thread type | Metric thread |
Pitch | 1.25 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
RoHS-compliant | Yes |
Last viewed
Surface-mounted utility outlet IP44, phase inverter
Hose clamp A4 stainless steel
Spotlight Tracklight Spot
Circuit board support TRCRLCBSK2
Middle bracket WMT SC-10 HDG Hot dip zinc-plated, Meka
Cable protection conduit TEL B, PVC red
High-bay luminaire IP65 High Bay Gen 4
Hexagon socket screw, cylinder head
LED transformer SLT
Circuit board support TRDLMSP