Taptite, GEFU® thread-forming screws Taptite 2000® thread, truss head, TX drive
Mechanical and functional properties according to DIN¬7500-1 (model PE), case-hardened (-O-) zinc-plated steel, blue passivated (A2K), with anti-friction coating, head dimensions in accordance with ISO 14583
DIN 7500-PE TX15 A2K M5X35 TT 2000
With registration you can access the Würth Elektro online shop selection.
Thread-forming screws form threads in cast blind holes, through holes, drilled, lasered and punched holes in sheet metal parts. A thread-forming screw does not affect the structure of the material being fastened when it is screwed into it, unlike a self-tapping screw. The material moves out of the way and solidifies.
Benefits:
Saves costs
- The thread does not cut
Non-cutting thread-forming
Low clamping forces and greater thread flank coverage
- The TRILOBULAR shape of the screw core is combined with the thread’s flank radius profile
High clamping force
- Thanks to low clamping forces
High load-bearing capacity
- Thanks to the large thread flank coverage area
- Reinforcing thread that forms in the connected material
Loss prevention (less chance of screw loosening)
- Negligible clearance and self-locking tight thread
The formed thread corresponds to the standard metric thread
- If necessary, the GEFU screw can be replaced with a screw with a metric thread.
The applicable application or component must be tested beforehand for compatibility with the thread-forming GEFU® screw. Please see standard DIN 7500-2 for reference values for correct initial hole diameter choice.
Datasheets(X)
Last viewed
Downlight Spot Vario, IP20
Lighting rail adapter A75, Unipro
Set screw, hex socket, cup point
Residual current circuit breaker DX3 30mA
Slotted cable trunking with cut-off groove Trancab
Through standoff WESO
Flush-mounted outlet with cover plate IP21 Exxact
Downlight Optic G2 Quick 6pac, IP44
Circuit board support TRDLCBST
Nylock nut, low profile, clamping piece (non-metal insert, ring)