Drilling screw pan head DIN 7504-N
Drilling screw, pan head, DIN 7504-N, PH, steel, zinc plated
DIN 7504-N PH ZN 2,9X9,5
Art.-no.
021129 95
EAN 6438190759417
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- For fixing to aluminium and steel substrates in applications without approval.
- For aesthetically pleasing visible connections without an additional insulating floor plate.
- Zinc-plated drilling screws may only be used in places where no moisture is expected.
- Building permits and their regulations must be followed when using building permit compliant fastening elements.
With drill tip, mounting time reduced by at least 50%:
- Drilling without centring device
- threading
- fixing
All in one work phase.
Product information
Datasheets(X)
 | |
Nominal diameter (d) | 2.9 mm |
Length (l) | 9.5 mm |
Last viewed
Terminal block 2002 series triple-deck 2 conductor TOPJOB® S
Downlight FTLight Luce round surface, IP44
Alarm cable bracket FDC zinc plated, Meka
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Closet IP66, Fe Spacial S3D
Lighting rail adapter A100, Unipro
Cable gland T-VET PG
Vehicle protecting tube PAER
Earthing connector Instal
Slotted screw ISO 14580