Fibre gasket, sealing ring, vulcanised rubber, type A
Type A
DIN 7603-A CU 8X14X1
With registration you can access the Würth Elektro online shop selection.
Fibre gasket, this sealing ring made of vulcanised fibre is resistant to mineral oils, grease and weak acids, ketones, esters, and chlorocarbon; it also has low conductivity (insulation). It is best suited for all kinds of water conduits and pipelines.
Datasheets(X)
 | |
Material | Vulcanised fibre |
Surface | Plain |
Form | A |
Nominal size | 8 x 14 mm |
Internal diameter (d) | 8.2 mm |
Outer diameter (d) | 13.9 mm |
Thickness (h) | 1 mm |
Suitable for vehicle manufacturer | Mercedes-Benz |
Corresponds to original spare part number | Mercedes: 007 603 008108 |
Max. temperature resistance | 120 °C |
DIN | 7603 |
Notice | When choosing sealing rings, note that the dimensions are defined as the internal and external diameter. Should the correct sealing ring size be unavailable, the sealing ring must be chosen based on internal diameter. E.g. a 10x12 sealing ring is replaceable with a 10x14 or even 10x16 sealing ring. |
Last viewed
Push-button Valena
Working current tripping device MS
Circuit board support TRMDLSP1
Lighting rail T33, Unipro
Plastic rivet TRMB
Cable routing conduit FT 40 aluminium, Instal
Motor protection switch MPX3 32H
Terminal block 2106 series with lever 3 conductor TOPJOB® S
Washer for cylinder head screws
Auxiliary contact block TeSys