Tapping screw countersunk head DIN 7973-C
Tapping screw, countersunk head, DIN 7973-C, slotted, stainless steel A2, type C
DIN 7973-C SLOT A2 4,8X38
Art.-no.
012024838
EAN 6438190614747
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Product information
Datasheets(X)
 | |
Nominal diameter (d) | 4.8 mm |
Length (l) | 38 mm |
Head diameter (d) | 9.5 mm |
Head height (k) | 3 mm |
Last viewed
Defrosting mat Ebeco
Extension cord dual sockets
Sealing ring
Membrane gland Forix
Cable routing conduit T-piece LKM
Plastic cabinet Cubo S
Streetlight Eco Area IP66
Wall luminaire
Cable tie adhesive anchor MB series Hellermann PA, screw and adhesive fastener, Black
Cable trunking, screw mounting, WDK