Tapping screw pan head DIN 7981-C
Tapping screw, pan head, DIN 7981-C, stainless steel A2, PZ, type C
DIN 7981-C PZ A2 2,2X9,5
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Stainless steel sheet metal screws are softer than case-hardened steel tapping screws. This means they bite poorly into the fastening sheet metal. Therefore they are only recommended for use in soft materials, e.g., aluminium.
Datasheets(X)
 | |
Nominal diameter (d) | 2.2 mm |
Length (l) | 9.5 mm |
Head diameter (d) | 4.2 mm |
Head height (k) | 1.8 mm |
Last viewed
Slotted screw pan head DIN 7985
Electrical wire H07V2-K MULTINORM UL1015
Surface-mounted EV charging outlet
Safety label 793 series, WMB, WAGO
LED strip profile cap LS
Cable spiral wrap
Inductive sensor Embeddable, OsiSense
Partition AP zinc plated, Meka
Ring bolt
Wall bracket WMT WB1 HDG Hot dip zinc-plated, Meka