Tapping screw pan head DIN 7981-C
Tapping screw, pan head, DIN 7981-C, stainless steel A2, PZ, type C
DIN 7981-C PZ A2 2,9X6,5
Art.-no. 0119052965
EAN 6438190693483
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Stainless steel sheet metal screws are softer than case-hardened steel tapping screws. This means they bite poorly into the fastening sheet metal. Therefore they are only recommended for use in soft materials, e.g., aluminium.
Datasheets(X)
 | |
Nominal diameter (d) | 2.9 mm |
Length (l) | 6.5 mm |
Head diameter (d) | 5.5 mm |
Head height (k) | 2.2 mm |
Notice | Stainless steel sheet metal screws are softer than case-hardened steel tapping screws. This means they bite poorly into the fastening sheet metal. Therefore they are only recommended for use in soft materials, e.g., aluminium. |
Last viewed
Hexagon socket screw, cylinder head
Surface outlet box Red Range Q 4-L IP20, plastic
Washer, flat, no chamfer
Pipe end cap plastic
Charging station load management control unit EVlink Home Peak Controller 1-phase
Brass bar PSK
Plastofast, pan head with flange
Wall bracket VKF hot dip galvanised, Meka
Energy meter kWh meter 32 A 1-phase
