Tapping screw pan head DIN 7981-C
Tapping screw, pan head, DIN 7981-C, stainless steel A2, PZ, type C
DIN 7981-C PZ A2 4,2X9,5
Art.-no.
0119054295
EAN 6438190685877
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Notice
Stainless steel sheet metal screws are softer than case-hardened steel tapping screws. This means they bite poorly into the fastening sheet metal. Therefore they are only recommended for use in soft materials, e.g., aluminium.
 | |
Nominal diameter (d) | 4.2 mm |
Length (l) | 9.5 mm |
Head diameter (d) | 8.2 mm |
Head height (k) | 3.05 mm |
Product information
Datasheets (0)
Certificates/ Documents (0)
