Tapping screw pan head DIN 7981-C
Tapping screw, pan head, DIN 7981-C, zinc-plated steel, PZ, type C
DIN 7981-C PZ A2K 3,5X13
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Datasheets(X)
 | |
Nominal diameter (d) | 3.5 mm |
Length (l) | 13 mm |
Head diameter (d) | 6.9 mm |
Head height (k) | 2.6 mm |
Last viewed
Hexagon socket screw, flat round head, flange
Connector component for DLP-S cable channel
LED power source 12V IP20 standard FTLight
DIN installation bar Spelsberg
Grommet IP54, EPDM, PG
Wire end ferrule uninsulated
Hexagon socket screw, flat cylinder head, centre hole
Ring wire terminal insulated PVC
Cover plate 85 mm Jussi
Adapter plate 100 mm Valena Life