Tapping screw pan head DIN 7981-C
Tapping screw, pan head, DIN 7981-C, acid-resisting steel A4, PZ, type C
DIN 7981-C PZ A4 2,9X19
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Stainless steel sheet metal screws are softer than case-hardened steel tapping screws. This means they bite poorly into the fastening sheet metal. Therefore they are only recommended for use in soft materials, e.g., aluminium.
Datasheets(X)
 | |
Nominal diameter (d) | 2.9 mm |
Length (l) | 19 mm |
Head diameter (d) | 5.6 mm |
Head height (k) | 2.2 mm |
Last viewed
Contactor AF16
Lighting rail adapter A100, Unipro
Wall luminaire IP44, Dana FTLight
Spacer ring AK14
Locknut, polyamide
Terminal block ZS16 SNK series
Wire shelf WMT Acid-resisting steel, Meka
Cable tie anchor CTM-set, Hellermann PA, screw fastening, Black
Ceiling hook, wood screw thread
Compressed crimp cable lug