Tapping screw pan head DIN 7981-C
Tapping screw, pan head, DIN 7981-C, acid-resisting steel A4, PZ, type C
DIN 7981-C PZ A4 4,2X25
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Stainless steel sheet metal screws are softer than case-hardened steel tapping screws. This means they bite poorly into the fastening sheet metal. Therefore they are only recommended for use in soft materials, e.g., aluminium.
 | |
Nominal diameter (d) | 4.2 mm |
Length (l) | 25 mm |
Head diameter (d) | 8.2 mm |
Head height (k) | 3.05 mm |
Datasheets(X)
Last viewed
Cable trunking, external angle DLP-S
Safety label 793 series, WMB, WAGO
Hexagon socket screw, flat round head
Surface-mounted type F outlet hinged IP44 Artic
Connection unit CCU3B, Unipro
Gate bracket TPK hot dip galvanised, Meka
Mounting box cover PM107
Blind rivet domed head open
Illuminated releasable push button Compact
Locknut, brass