Tapping screw pan head DIN 7981-C
Tapping screw, pan head, DIN 7981-C, zinc-plated steel, PZ, type C
DIN 7981-C PZ ZP 2,9X19
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Datasheets(X)
 | |
Nominal diameter | 2.9 mm |
Length | 19 mm |
Head diameter (d) | 5.6 mm |
Head height | 2.2 mm |
Last viewed
Hexagon socket screw, flat round head
Cable spiral wrap white, halogen free
G-Tubular glass fuse, slow (T) 6.3X32mm
Dimmer spare part set Exxact
Combination thermostat ETH-BLANK-WIFI
Screw-in cable clip white Thorsman
Analogue time switch Legrand
Switch body, flush IP20 Impressivo
Surface-mounted luminaire IP65 Surface Bulk Head with motion detector
Arch clamp KK hot-dip galvanised