Tapping screw pan head DIN 7981-C
Tapping screw, pan head, DIN 7981-C, stainless steel A2, TX, type C
DIN 7981-C TX10 A2 2,9X6,5
Art.-no.
711522965
EAN 6438190761021
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Product information
Datasheets(X)
 | |
Nominal diameter | 2.9 mm |
Length | 6.5 mm |
Head diameter (d) | 5.6 mm |
Head height | 2.2 mm |
Last viewed
Terminal block 2002 series triple-deck 2 conductor TOPJOB® S
Motor protection switch MS116
Thermal relay TF-42
IP55 equipment cabinet Ebeco
Lighting rail T33, Unipro
Slotted screw pan head DIN 7985
Ethernet CAT6A connector Actassi
EMC LOCKNUT MS PG EMC, brass nickel plated
Office luminaire Linear IndiviLED Direct/Indirect
Locknut, polyamide