tapping screw pan head DIN 7981-C
Tapping screw, pan head, DIN 7981-C, zinc-plated steel, TX, type C
DIN 7981-C TX20 ZP 4,2X38
Art.-no.
411542 38
EAN 6438190308844
-
Show availability at another Center
In order to check the stock in a Würth Elektronik Oy branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user?\r\nPlease go to the WürthElektroShop registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Product information
Datasheets(X)
 | |
Nominal diameter | 4.2 mm |
Length | 38 mm |
Head diameter (d) | 8.2 mm |
Head height | 3.05 mm |
Last viewed
Dimmer switch NOCTURNE
Through standoff WESO
Downlight Downlight Comfort, IP54
Rubber seal Multilayer
Signal cable FLEX-JZ
ENLARGER PA M/M Polyamide
Energy meter kWh meter 45 A 1-phase
Slotted screw pan head DIN 7985
Wire end ferrule Insulated For one conductor
Lighting rail T-component CTA3C, Unipro