Tapping screw pan head DIN 7981-F
Tapping screw, pan head, DIN 7981-F, zinc-plated steel, PZ, type F
DIN 7981F 4,2x16 ZP BZ PZ
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Datasheets(X)
 | |
Nominal diameter | 4.2 mm |
Length | 16 mm |
Head diameter | 8.2 mm |
Head height | 3.05 mm |
Last viewed
Office luminaire Linear IndiviLED Direct/Indirect
Wall bracket Defem B4 A4, Wibe
Line protection switch Acti 9 IC60H
Flush-mounted switch IP21 Exxact
Blind rivet flange head open
Valena Life with Netatmo outlet
ENLARGER PA PG/PG Polyamide
Enclosed industrial luminaire Damp Proof Classic, IP65
Flush-mounted outlet diagonal IP21 Exxact
Lighting rail T-component TA3A, Unipro