Tapping screw pan head DIN 7981-F
Tapping screw, pan head, DIN 7981-F, zinc-plated steel, PZ, type F
DIN 7981F 4,8X16 PZ BZ ZP
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Datasheets(X)
 | |
Nominal diameter | 4.8 mm |
Length | 16 mm |
Head diameter | 9.5 mm |
Head height | 3.55 mm |
Last viewed
Circuit board support TRDLCBST
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Slotted cable trunking with cut-off groove HF Transcab Legrand
Halogen-free wiring tray cover Legrand
Cover plate 87 mm Exxact
3-phase supply terminal MS
ENLARGER PA M/M Polyamide
EMC LOCKNUT MS PG EMC, brass nickel plated
Telecom outlet data 2xActassi CAT6A STP angled, flush Exxact
Open industrial luminaire IP23 Low Bay FLEX