Tapping screw countersunk head DIN 7982-C
Tapping screw, countersunk head, DIN 7982-C, PH, zinc-plated steel, type C
DIN 7982C PH ZP 4,8X19
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Datasheets(X)
 | |
Nominal diameter (d) | 4.8 mm |
Length (l) | 19 mm |
Head diameter (d) | 9.5 mm |
Head height (k) | 3 mm |
Last viewed
Contactor AF12
DIN installation bar Spelsberg
Damp proof industrial luminaire IP65 Damp Proof Classic sensor
Damp proof Industrial luminaire IP66 Damp Proof Compact Gen 2
End plate 769 series
Heat shrink hose with adhesive: FRG8003
Button/indicator light shield Osmoz
Lighting rail cover CS3, Unipro
Adapter 1-pt/2-pt Impressivo
Flush-mounted switch 10AX – 250V IP20 Valena Life