Tapping screw raised countersunk head DIN 7983-C
Tapping screw, raised countersunk head, DIN 7983-C, PH, zinc-plated steel, type C
DIN 7983-C PH A2K 4,8X19
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Datasheets(X)
 | |
Nominal diameter (d) | 4.8 mm |
Length (l) | 19 mm |
Head diameter (d) | 9.5 mm |
Head height (k) | 3 mm |
Last viewed
Cable-in-conduit Aalto 20HF 2CAT6 UTP
LED power source 24V IP20 standard FTLight
Switch-gear Data Pikku-Waltteri
Residual current device IP20, Impressivo
Wire marker roll 1.5 to 4 mm2 PA series
Hexagon nut
Surface-mounted switch
Terminal block 2002 series 3-conductor TOPJOB® S
High-bay luminaire IP65 High Bay Gen 4
Closet IP66, Fe Spacial S3D