Tapping screw raised countersunk head DIN 7983-C
Tapping screw, raised countersunk head, DIN 7983-C, PZ, acid-resisting steel A4, type C
DIN 7983-C PZ A4 4,8X25
Art.-no.
0127694825
EAN 6438190688809
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Product information
Datasheets(X)
 | |
Nominal diameter | 4.8 mm |
Length | 25 mm |
Head diameter (d) | 9.5 mm |
Head height | 2.5 |
Last viewed
Distribution terminal block TOPJOB S
Terminal block 2016 series 2 conductor TOPJOB® S
Flush-mounted switch IP21 Exxact
Signal cable FLEX-JZ
Press-in screw WEFHS
Auxiliary contactor block CTX22
Cable routing conduit plastic, Inform
Snow melting mat Ebeco Snowmat
Circuit board support TRLCBS
3-phase conductor rail system MS