Tapping screw raised countersunk head DIN 7983-C
Tapping screw, raised countersunk head, DIN 7983-C, PH, black passivated steel, type C
DIN 7983C PH 4,2x25 BLACK ZP
Art.-no.
013742 25
EAN 6416562094847
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Product information
Datasheets(X)
 | |
Nominal diameter | 4.2 mm |
Length | 25 mm |
Head diameter (d) | 8.1 mm |
Head height | 2.5 mm |
Last viewed
PE bars with 16 mm2 and 6 mm2 pillar terminals KNA
Ceiling/wall light Outdoor Led Surface Square, IP54
Reducing nipple
Terminal block ZS16 SNK series
Rotary dimmer Valena
Motor protection switch MS116
Hexagon socket screw, cylinder head
Instrumentation cable NOVAK halogen-free
Circuit board support TRMDLSP3
Pipe clip VBS 2955 OBO