Hexagon nut
DIN 934, steel I12I, uncoated
DIN 934/12 ST M8
Art.-no. 032489908
EAN 4055375966761
With registration you can access the Würth Elektro online shop selection.
DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
- To differentiate, the hardness class designation has two vertical bars before and after the hardness code.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (D) | M8 x 1.25 |
Thread type x nominal diameter (D) | M8 |
Height (m) | 6.5 mm |
External drive (s) | WS13 |
Standards | DIN 934 |
Material | Steel |
Property class | I12I |
Thread type | Metric thread |
Surface | Plain |
RoHS-compliant | Yes |
Notice | DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread). |
Last viewed
Wire marker roll 2.5 to 16 mm2 Helagrip HGDC
Installation conduit JM Wavin
Flush-mounted outlet with cover plate IP21 Exxact
Circuit breaker Acti 9 iC60N
Tapping screw pan head ISO 14585-C
Ceiling bracket CB3, Unipro
Hexagon socket screw, flat round head
End component P Instal
Hexagon socket screw, flat round head, flange
Serrated lock washer, serrated washer, externally serrated, type A