Hexagon nut
DIN 934, steel I6I/I8I zinc plated, blue passivated (A2K)
DIN 934 6 ZN M5
With registration you can access the Würth Elektro online shop selection.
DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (D) | M5 x 0.8 |
Thread type x nominal diameter (D) | M5 |
Height (m) | 4 mm |
External drive (s) | WS8 |
Standards | DIN 934 |
Material | Steel |
Property class | I6I |
Thread type | Metric thread |
Surface | Zinc plated |
RoHS-compliant | Yes |
Notice | DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread). |
Last viewed
Signal cable LIYCY
Drilling screw hexagon head DIN 7504-K
Lock screw, round pan head, square lock
Surface-mounted luminaire IP65 Surface Bulk Head with motion detector
Grooved nut for clamping sleeve
Washer, flat, for hexagon bolts and nuts
Defrosting cable Ebeco Frostvakt 10
Linear luminaire IP44 Linear Surface Gen 2
Circuit board support TRDLCBS3
Taptite, GEFU® thread-forming screws Taptite 2000® thread, truss head, TX drive