Hexagon nut
DIN 934, steel I6I/I8I zinc plated, blue passivated (A2K)
DIN 934/6 ZP M3
With registration you can access the Würth Elektro online shop selection.
DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (D) | M3 x 0.5 |
Thread type x nominal diameter (D) | M3 |
Height (m) | 2.4 mm |
External drive (s) | WS5.5 |
Standards | DIN 934 |
Material | Steel |
Property class | I6I |
Thread type | Metric thread |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Flush-mounted outlet IP21 Exxact
Ceiling bracket RTF-S Hot dip galvanised, Meka
Outlet panel IP44 Pinseri, A2 stainless steel
DIN installation bar Spelsberg
Lighting rail TC34, Unipro
Wall bracket WMT WB1 HDG Hot dip zinc-plated, Meka
Downpipe Instal
Locknut, polyamide
Lock washer, type B
Tensioning disk, tension washer with screw connections