Hexagon nut, fine thread
DIN 934, steel I8I, zinc plated, blue passivated (A2K)
DIN 934/8 A2K M8X0,75
With registration you can access the Würth Elektro online shop selection.
DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Can be stored in the ORSY® system
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M8 |
Thread type x nominal diameter x pitch (D) | M8 x 0.75 |
Height (m) | 6.8 mm |
External drive (s) | WS13 |
Standards | DIN 934 |
Material | Steel |
Property class | I8I |
Thread type | Metric thread |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Signal cable FLEX-JZ-CY
Plafond light with motion sensor Surface Bulk Head EM, IP65
ecosyn®-plast
Office luminaire Linear IndiviLED Direct
Hexagon screw, partial thread
Hexagon nut, low profile
Set screw, hex socket, dog point
Nipple for board wall boxes ABB
Air purifier UVC HEPA AIR PURIFIER USB
Surface-mounted outlet IP44 Exxact