Hexagon nut
DIN 934, steel I8I, hot-dip galvanised (TZN)
DIN 934/8 M16 HDG 6H
With registration you can access the Würth Elektro online shop selection.
DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (D) | M16 x 2.000 |
Thread type x nominal diameter (D) | M16 |
Height (m) | 13 mm |
External drive (s) | WS24 |
Standards | DIN 934 |
Material | Steel |
Property class | I8I |
Thread type | Metric thread |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Notice | DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread). |
Last viewed
Fender washer, wing repair washer, round role, primarily for wood substrates
Blind rivet domed head closed
Flush-mounted switch
Circuit breaker
Circuit board support TRMDLSP1
Slotted screw pan head DIN 7985
Blind rivet domed head closed
Auxiliary contactor block CTX22
Counter shell VVL L
Circuit breaker